List Of Contents - stayer SC241W Operating Instructions Manual

18.Nut for vertical adjustment for fixed mitre angles
at 0º
19.Screw for vertical adjustment for fixed mitre
angles at 0º
20.Nozzle for expelling sawdust
21.Cutting disk
22.Saw blade fastening screw
23.Clamping flange
24.Wing nuts for adjusting the height of the upper
table / fastening the lower guard
25.Upper cutting table
26.Movable guard of the upper table
27.Movable stopper guide of the upper table
28.Wing nut for adjusting the movable stopper
guide of the upper table
29.Locking button for the upper resting position
30.Locking button for the tiltable guard hood
31.Locking button for the lower resting position
32.Counterweight spring for the cutting head
33.Adjustment cam for the indicator for horizontal
angles
34.Stationary lower guard
35.Nut for retaining the adjustment of the locking in
the lower position
36.Screw for adjusting the locking in the lower
position
37.Keel of the upper table
38.Lock for the guard of the upper table
39.Fastening screw for the adjusting system for
fixed-length cutting
40.Fastening wedge of the adjusting system for
fixed-length cutting
41.Support for the adjusting system for fixed-length
cutting
42.Adjustable stopper of the adjusting system for
fixed-length cutting
43.Adjusting wing nut for the movable stopper
guide of the upper table
44.Insertion hollow of the system for fixed-length
cutting
45.Cutting length scale of the upper table
46.Keel height adjusting screw
47.Brush-holder lid
48.Fastening screw for the brush-holder cover
49.Brush-holder
50.Brush-holder connecting screw
51.Brush pressing spring
52.Brush
53.Horizontal head movement button.
54.Adjustment screws crankcase.
55.Cover fixing bolts of the keel top table.
56.Cover top table keel.
6 . L i m i t a t i o n s r e g a r d i n g
environmental conditions
The IP degree of this machine is 20. This machine is
protected against its dangerous parts being
accessed by a finger and against solid foreign
particles having diameters of 12'5 mm and more.
This machine does not have any kind of protection
against the entry of water so that its use in exterior
or interior environmental conditions with a risk of
precipitations is forbidden.
ENGLISH
29

7.List of contents

1.Provided uses of the machine
2.Unpackaging and assembling
3.Setting or fastening the machine in a stable
position
4.Connection to the grid, wiring, fuses, socket type
for the jack and grounding conditions
5.Illustrated descriptions of functions
6.Limitations regarding environmental conditions
7.List of contents
8.Settings and testing
9.Changing tools
10.Fixing for operation
11.Limits regarding the workpiece size
12.General instructions for use
13.Precautions and working garment
14.Special safety precautions
15.Measures for preventing machine-specific risks
16.Dust extraction
17.General safety instructions
18.Regular cleaning, maintenance and greasing
19.Repair service by the manufacturer or
commercial agent
20.List of parts that may be replaced by the user
21.Special tools as possibly required
22.Safe operation
23.Technical specifications
24.Warrantee
25.Declaration of conformity
8.Settings and testing
Warning!
Before any intervention on the electrical tool
remove jack from power socket.
If the machine has been subject to prolonged or
intense use, it must be checked and adjusted so as
to ensure the machine's correct quality of service
and safety.
This requires knowledge, experience and special
tools. The official technical service of Stayer Iberica
S.A. will carry out that work for you in a quick
thorough and inexpensive manner.
Adjusting the locking in the lower resting
position
IMAGES
A
Checking
1.On starts from the machine being locked in the
upper resting position.
2.Unlock by pressing button 29.
3.Lower down to the lower stop by means of 4.
Press button 31. If the bolt of the button is well
adjusted, it must enter until abutting. Otherwise
proceed to adjusting
29
C