stayer CP190 Operating Instructions Manual
Hide thumbs
Also See for CP190:
- Operating instructions manual (40 pages) ,
- Operating instructions manual (41 pages) ,
- Operating instructions manual (49 pages)
Table of Contents
Advertisement
Quick Links
ES
Manual de instrucciones
IT
Istruzioni d'uso
GB
Operating instructions
FR
Instructions d´emploi
P
Manual de instruções
Kullanma Kılavuzu
Instrukcja obsługi
Área Empresarial Andalucía - Sector 1
C/ Sierra de Cazorla, 7
28320 - Pinto (Madrid) SPAIN
Email: sales@grupostayer.com
Email: info@grupostayer.com
CP190
CP190C
CP236
CH185C
www.grupostayer.com
Advertisement
Table of Contents
Related Manuals for stayer CP190
Summary of Contents for stayer CP190
- Page 1 CP190 Manual de instrucciones CP190C Istruzioni d’uso Operating instructions CP236 Instructions d´emploi CH185C Manual de instruções Kullanma Kılavuzu Instrukcja obsługi Área Empresarial Andalucía - Sector 1 C/ Sierra de Cazorla, 7 28320 - Pinto (Madrid) SPAIN Email: sales@grupostayer.com Email: info@grupostayer.com...
- Page 4 CP190 CP190C CP236 CH185C 1600 1600 2000 1300 4500 5000 4500 4500 190x25.4 Z-24 190x30 Z-24 235x25.4 Z-24 185x16 Z-24 Ø º 0-45 0-45 0-45 45º 0-65 0-44 dB(A) K=3db dB(A) K=1.5 m/s <2.5 <2.5 <2.5 <2.5...
- Page 5 ENGLISH Safety Warnings for Circular Saws - When restarting a saw in the workpiece, centre the saw blade in the kerf and check that saw teeth are not engaged into the material. If saw blade is Cutting procedures binding, it may walk up or kickback from the workpiece - DANGER: Keep hands away from cutting area and as the saw is restarted.
-
Page 6: Product Description And Specifications
25 Cutting-depth scale. 26 Wing bolt for bevel-angle preselection. 27 Set of screw clamps**. The undersigned: STAYER IBERICA, S.A. *Accessories shown or described are not part of the standard With address at: delivery scope of the product. A complete overview of accessories Calle Sierra de Cazorla, 7 can be found in our accessories program. -
Page 7: Operation
19. The machine can be plugged directly into the receptacle Otherwise, the power tool can be damaged. of a STAYER all-purpose vacuum cleaner with remote starting control. * With the Hex key 17, unscrew the clamping bolt 18 The vacuum cleaner starts automatically when the turning in rotation direction 1. -
Page 8: Working Advice
ENGLISH workpiece. Less than a full tooth of the blade teeth Therefore, use only sharp saw blades that are suited for should be visible below the workpiece. the material to be worked. Loosen the clamping lever 24. For a smaller cutting depth, - Before any work on the machine itself, pull the pull the saw away from the base plate 12;... - Page 9 Área Empresarial Andalucía - Sector 1 C/ Sierra de Cazorla, 7 28320 - Pinto (Madrid) SPAIN Email: sales@grupostayer.com Email: info@grupostayer.com www.grupostayer.com...