Kollmorgen SERVOSTAR 300 Manual page 47

Y Adapter (Splitter) for S300/S600/S700
The signals for the serial link to the PC and the CAN interface are routed via the same con-
nector on the servo amplifier (X6). Our Y adapters can be used for simultaneous access to
both interfaces. In this case, the interface signals are routed via separate connectors.
Article
Y-Programming-Adapter 1 Axis
Y-Adapter -SR6Y- 4 Axes (Multilink Cable)
Y-Adapter -SR6Y6- 6 Axes (Multilink Cable)
The multi-axis Y adapters support the simultaneous setup (multi-link) of a number of
S300/S600/S700 in a single setup session.
Y-adapter for 1 Axis
Order Code
DE-108211
DE-90060
DE-92042
Y-adapter for 4 axes
Accessories Europe | 11 Cables
Y-adapter for 6 axes
Kollmorgen | December 2014 47