Low Battery Alarm; Trainer; Master; Slave Mode - Spektrum DX6i Manual

When the battery voltage drop below 4.3 volts an alarm will sound and the screen will flash.
The DX6i offers a Trainer function that allows the transmitter to operate as a master or slave. The trainer switch is
located on the back left of the transmitter. (The trainer switch is located on the back right on Mode 1 transmitters.)

MASTER

The transmitter can be used as a master but the slave transmitter must have the same programming (i.e. reverse,
travel adjust, dual rates, mixes, sub trims, etc.) as the master.
When using the transmitter as a slave with another DX6i, it's necessary to match all the programmable settings (i.e.
reverse, travel adjust, etc.).
The roller is used to access all programming functions.
Anytime the transmitter is turned on, the main screen will appear.
Reduce photo to 13.5%
MUSTANG
MDL6
5.0V DN06:00
From the ADJUST LIST or SETUP LIST screens, pressing and holding the roller for more than three seconds then
releasing the roller will return the display to the main screen.
From the any program function screens, pressing and holding the roller for more than three seconds then releasing
the roller will return the display to the LIST of SETUP screen.
30