Spektrum DX6i Manual page 95

The DX6i features an on screen timer with two programming options:
Down Timer - The countdown timer allows a preset time in ten-second intervals up to 59 minutes and 50 seconds
to be programmed, and when that time expires, a beeper will sound five (5) beeps every five (5) seconds.
Up Timer - The up timer function is a simple count-up timer that displays minutes and seconds up to 59
minutes and 59 seconds. The start time can be programmed. In most cases the default start setting of 00:00 is
recommended.
When the DOWN-TIMER or UP-TIMER function is selected, the timer will be displayed on the main screen. The
following buttons are used in conjunction to operate the timer function:
Trainer Timer button- when programmed Used to stop start and reset the timer.
Throttle Cut button- when programmed Used to start stop and reset the timer.
: To reset the timer press and hold the assigned timer switch (throttle cut or trainer) for more
than 3 seconds.
Press the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screen
release the roller.
Reduce photo to 13.5%
SETUP LIST
D/R&COMBI
TIMER
RANGE CHECK
Main
8
95