Spektrum DX6i Manual page 84

Rotate the roller to highlight the block below the MODEL # shown on the screen then press the roller.
Rotate the roller to select the desired position that you wish to assign a letter or number to then press the roller to
access the numbers or letter characters.
Rotate the roller to scroll through the letters/ numbers and when the desired number is selected pressing the roller
will assign it to the selected position.
Repeat this process to complete the model name then highlight OK! when finished.
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
Rotate the roller to highlight LIST in the upper right corner then pressing the roller will return the system to
the SETUP LIST screen.
84
Reduce photo to 13.5%
MODEL NAME
MODEL 1
BLADE 400
List