The Reverse Switch function allows electronic means of reversing the servo's throw. Servo reversing is available
for all six channels.
Press the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screen
release the roller.
Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LIST
then scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST then press the roller.
Rotate the roller to highlight REVERSE then press the roller to access the REVERSE function.
Reduce photo to 13.5%
SETUP LIST
MODEL TYPE
Reduce photo to 13.5%
SETUP LIST
MONITOR
REVERSE
THRO CUT
Main
Main
4
39