Spektrum DX6i Manual page 110

Rotate the ROLLER to the right until D/R&COMBI is highlighted on screen.
Press the roller to access the Dual Rate and Expo function.
Move the respective D/R switch in the desired position (0 or 1) that you wish to change.
Rotate the roller to highlight the desired channel's EXPO or D/R value that you wish to adjust.
Press the roller to access the D/R or EXPO value.
Rotate the roller to adjust the D/R or EXPO value.
After the desired value is programmed press the roller to deselect the value.
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
Rotate the roller to highlight LIST then press the roller.
The Dual Rate and Expo functions for aileron, elevator and rudder can be combined on a single switch
conveniently allowing high or low rates to be selected via one switch. The choices for this are found on the
COMBI SWITCH on page 93.
110
Reduce photo to 13.5%
ADJUST LIST
MODEL SELECT
D/R&EXPO
TRAVEL ADJ
Reduce photo to 13.5%
D/R&EXPO
AILE 1 100%
ELEV 1 100%
RUDD 1 100%
Main
2
List
INH%
INH%
INH%