Rotate the roller to highlight WINGTAILMIX then press the roller to access the Wing tail mix function.
Rotate the roller to highlight the desired wing or tail type then press the roller to highlight the desired function.
Rotate the roller to inhibit (INH) or activate (ACT) the function.
: When Flaperon or Delta Wing type is selected, the travel adjustment is used to adjust the
individual servo throw, while the combined aileron travel is adjusted with the aileron dual rate. It
is also possible to set aileron differential. Reverse switches are applicable for each servo. Neutral
adjustments of each servo are made by the Sub Trim Function.
44
Reduce photo to 13.5%
SETUP LIST
THRO CUT
WINGTAILMIX
D/R COMBI
Reduce photo to 13.5%
WINGTAILMIX
DUALAILE INH
V-TAIL
INH
ELEVON
INH
Main
6
List