Items Included; Battery Requirements - Spektrum PowerSafe AR9100 User Manual

Items Included

• PowerSafe main unit - SPMAR9100
• Three remote receivers - SPM9545
• Soft switch - SPM6820
• One 24" remote receiver extension - SPM9013
• One 12" remote receiver extension - SPM9012
• One 9" remote receiver extension - SPM9011
• Instruction Manual
• Male/Female bind Plug-SPM6803
Optional Items
• 1650mAh 6.0V Ni-MH Receiver Pack - SPMB1650NM
2150mAh 6.0V Ni-MH Receiver Pack - SPMB2150NM
2700mAh 6.0V Ni-MH Receiver Pack - SPMB2700NM
4500mAh 6.0V Ni-MH Receiver Pack - SPMB4500NM
• Flight Log data recorder - SPM9540
• Additional remote receiver - SPM9545
• 6" Remote receiver extension - SPM9010
• 9" Remote receiver extension - SPM9011
• 12" Remote receiver extension - SPM9012
• 24" Remote receiver extension - SPM9013
• 36" Remote receiver extension - SPM9014
• 12 inch EC3 extension - SPMEXEC312
• 24 inch EC3 extension - SPMEXEC324


Battery Requirements

Using One Battery
The PowerSafe allows the option of using one or two battery packs.
When using one battery simply plug the battery into either one of
the two battery connectors (BATT 1 or BATT2). Be sure to secure the
unused battery connector. Note that the open contacts of the unused
battery are not back powered (not electrically hot), however, the
unused connector should be secured to prevent it from entangling
during flight. When the system is powered using one battery a single
blue LED will constantly emit when the system is powered.
Using Two Batteries
The PowerSafe offers a true redundant dual battery system. When
using two packs, if one should fail (open circuit, short circuit or
becomes fully discharged), the other battery will provide power
to the system. When using dual batteries it's recommended that
both batteries be of the same capacity and ideally of the same age/
previous profile. When using two batteries the total available capacity
equals the sum total of both batteries i.e. BATT1- 2000mAh +
BATT2- 2000mAh= a total capacity of 4000mAh
Spektrum AR9100