Model Name - Spektrum DX6i Manual

Rotate the roller to highlight the desired value that you wish to adjust.
Press the roller to access the selected value.
Rotate the roller to select adjust the selected value.
After the desired value is programmed press the roller to deselect the value.
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
Rotate the roller to highlight LIST then press the roller.
The SETUP list contains the programming functions that are normally only used during the initial setup of the
model (i.e. model type, servo reverse, model name).
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
Rotate the roller to highlight LIST then press the roller.
Reduce photo to 13.5%
REVO MIX
NORM+ STUNT
UP 0% UP
DN 0% DN
List
0%
0%
131