Both mixes offer a trim feature that, when activated, cause the master channel's trim to also affect the slave channel.
Rotate the roller to highlight TRIM.
Press the roller to access the trim function.
Rotate the roller to select ACT (activate) or INH (inhibit).
After the trim function is programmed press the roller to deselect the value.
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
Rotate the roller to highlight LIST then press the roller.
74
Reduce photo to 13.5%
MIX 1
THRO≥ THRO ACT
RATE D
0% U
SW AIL D/R TRIM ACT
List
0%