Spektrum DX6i Manual page 28

Press the roller to access the TRAVEL ADJ function.
Rotate the roller to highlight the desired channel.
Move the corresponding channel's stick or switch in the desired direction and hold the stick you wish to change
the travel adjust and note the arrow direction then press the roller to select that channel and direction.
Rotate the roller to adjust the travel adjust values in that selected direction only.
When the desired value is selected press the roller to deselect the channel.
Repeat for all other channels.
This completes the basic Quick Start setup for your airplane. For additional features like Dual and Expo rates,
Mixing, etc, see the appropriate pages listed in the table of contents.
: If your airplane's ailerons are controlled independently by two servos, see "WING TAIL MIX
Selection" on page 43 for specifics on programming DUAL AILERONS.
28
Reduce photo to 13.5%
TRAVEL ADJ
THRO+100% AILE+100%
ELEV+100% RUDD+100%
GEAR+100% FLAP+100%
List