General Notes About Maintenance - Specialized VADO User Manual

6. GENERAL NOTES ABOUT MAINTENANCE

The VADO is a high performance bicycle. All regular maintenance, troubleshooting, repair and parts replacement
must be performed by an Authorized Specialized Retailer. For general information regarding maintenance of your
bicycle, please refer to the Owner's Manual. In addition, routinely perform a Mechanical Safety Check before each
ride, as described in the Owner's Manual.
• Great care should be taken to not damage carbon fiber or composite material. Any damage may result in a loss of structural
integrity, which may result in a catastrophic failure. This damage may or may not be visible in inspection. Before each ride,
and after any crash, you should carefully inspect your bicycle for any fraying, gouging, scratches through the paint, chipping,
bending, or any other signs of damage. Do not ride if your bicycle shows any of these signs. After any crash, and before you
ride any further, take your bicycle to an Authorized Specialized Retailer for a complete inspection.
• Lifespan and the type and frequency of maintenance depends on many factors, such as frequency and type of use, rider
weight, riding conditions and/or impacts. Additionally, the VADO uses a power-assisted drive system, which means more
distance is covered in the same amount of time. Components may be subject to increased wear at different rates, depending
on the component. Drivetrain and brake components are especially subject to wear. Periodically have your Authorized
Specialized Retailer inspect your bicycle and components.
• Exposure to harsh elements, especially salty air (such as riding near the ocean or in the winter), can result in galvanic
corrosion of components, which can accelerate wear and shorten the lifespan. Dirt can also accelerate wear of surfaces
and bearings. The surfaces of the bicycle should be cleaned before each ride. Proper care and regular maintenance can help
increase the longevity of components. If you notice any signs of corrosion or cracking on the frame or any component, the
affected item must be replaced.
• While riding, listen for any creaks, as a creak can be a sign of a problem with one or more components. Periodically examine
all surfaces in bright sunlight to check for any small hairline cracks or fatigue at stress points, such as welds, seams, holes,
and points of contact with other parts. If you hear any creaks or discover any cracks, no matter how small, or any damage
to components, immediately stop riding the part and have it inspected by your Authorized Specialized Retailer. The bicycle
should also be maintained regularly by an Authorized Specialized Retailer, which means it should be cleaned, inspected
for signs of corrosion and/or cracks and lubricated. Regularly clean and lubricate the drivetrain according to the drivetrain
manufacturer's instructions.
• Do not use a high pressure water spray directly on the bearings. Even water from a garden hose can penetrate bearing seals
and crank interfaces, which can result in increased bearing and crank wear, which can affect the normal function of the
bearings. Use a clean, damp cloth and bicycle cleaning agents for cleaning.
• Do not expose the bicycle to prolonged direct sunlight or excessive heat, such as inside a car parked in the sun or near a
heat source such as a radiator.
WARNING! Failure to follow the instructions in this section may result in damage to the components
on your bicycle and will void your warranty, but, most importantly, may result in serious personal injury
or death. If your bicycle exhibits any signs of damage, do not use it and immediately bring it to your
Authorized Specialized Retailer for inspection.
CAUTION: Do not open the motor assembly. The motor assembly is a sealed maintenance-free
system. Any work on the motor assembly must be performed by a Specialized Service Center.
Your bicycle should be inspected and serviced by your Authorized Specialized Retailer on a regular
basis, depending on use. The first inspection should be performed within 200 km / 120 miles. See
detailed service schedule on
WARNING! Always turn off the battery when not in use and/or when working on it.
page 28.
8