Seatpost; Replacement Parts And Accessories - Specialized VADO User Manual

When inserting the seatpost into the seat tube, the seatpost must not extend out of the seat tube beyond the
minimum insertion/maximum extension line (min/max) on the seatpost. If the seatpost is at the min/max line and
the saddle is not high enough, the seatpost must be replaced with a longer one. For general instructions regarding
the installation of the seatpost, refer to the appropriate section in the Owner's Manual.
The VADO frames have a 30.9mm seatpost diameter and require that the seatpost have a tolerance of 30.78mm to
30.95mm.
WARNING! Failure to follow seatpost related min/max requirements may result in damage to the
frame and/or seatpost, which could cause you to lose control and fall.
If the seatpost is cut short, the min/max mark on the seatpost may no longer be accurate. Before
cutting the seatpost, note the min/max depth required by the seatpost manufacturer.
WARNING! Riding with an improperly tightened seatpost can allow the saddle to turn or move and
cause you to lose control and fall.
CAUTION: Inspect the seatpost and seat tube to ensure that there are no burrs or sharp edges.
Remove any burrs or sharp edges using fine grit sandpaper.
Specialized replacement parts and accessories are available through your Authorized Specialized Retailer.
5

4.4. SEATPOST

4.5. REPLACEMENT PARTS AND ACCESSORIES