Replacing Parts On Your L1E S-Pedelec - Specialized VADO User Manual

7. REPLACING PARTS ON YOUR L1e S-PEDELEC

The VADO bicycle, as originally spec'd, is approved as a Pedelec or an L1e S-Pedelec. If you change components
on the bicycle, it may no longer be approved by your local regulatory authority Below is a general summary of
components that may affect governmental approval if changed.
Make sure to consult with your local regulatory authority when making any modifications. Refer also to the
appropriate section in the Owner's Manual about changing components or adding accessories.
S-PEDELEC ONLY: The following parts are type approved and need to carry an e-mark:
LIGHTS
HORN
PEDELEC AND S-PEDELEC: The following parts must only be replaced with original components:
FRAME
FORK
MOTOR UNIT
BATTERY
CHARGER
SENSORS
The following parts do not require type approval:
CHAINRINGS
CHAIN
PEDALS (IF NOT WIDER)
CASSETTE
DERAILLEURS
SHIFTERS
SHIFTING CABLES
SHIFTING HOUSINGS
9
REAR VIEW MIRROR
ELECTRIC CONTROLLERS
ELECTRIC WIRING
HANDLEBAR REMOTE
DISPLAY
CRANKSET
REAR RACK
BOTTOM BRACKET
WHEELS
HUBS
TIRES (IF ETRTO IS FOLLOWED)
RIM TAPES
SPOKES
TUBES
HEADSET
RETRO REFLECTORS
FENDERS
BRAKES
BRAKE PADS
BRAKE HOSES
STEM
HANDLEBAR
GRIPS
KICKSTAND
SADDLE
SEATPOST