Removing The Battery; Cleaning; Storage - Specialized VADO User Manual

8
CLICK!
Press down on the battery near the power button until it clicks and engages with the lock (fig.8).
„
Reverse the installation steps:
Turn the key clockwise until the top end of the battery pops up slightly.
„
Holding the battery with two hands, lift the battery up slightly at the top, rotate the battery out toward the non-
„
drive-side of the bike then pull it out of the frame.
Turn the key counter-clockwise to remove the key from the lock.
„
Always turn the battery off and remove the charger from the battery before cleaning the bicycle. Remove the battery
from the bicycle before cleaning the battery.
Always unplug the charger from the battery and the wall socket before cleaning.
CAUTION: Never use a high-pressure cleaner when cleaning your VADO. Instead, use a dry or
slightly damp cloth. Please ensure no water comes into contact with the electrical components
while washing. Ask your Authorized Specialized Retailer for additional information about cleaning
your bicycle.
CAUTION: Do not use alcohol, solvents or abrasive cleaners to clean the charger or battery.
Instead, use a dry or slightly damp cloth.
CAUTION: If the battery is not being used for an extended period of time, remove the battery from
the frame and store it in a dry, well ventilated area and leave it uncovered. Only store the battery
at an ambient temperature between -20° C and +35° C (-4° F and +95° F). If outside temperatures
are too hot or too cold, store the battery inside.
CAUTION: If the battery is stored and not in use for extended periods of time, be sure to charge the
battery at least every three months to at least 2 LEDs (20-39%) are glowing green. If the battery
is not charged over a period longer than three months, it can cause damage to the battery.
Do not leave the battery connected to the charger for extended periods after the battery is
charged.
23

9.5. REMOVING THE BATTERY

9.6. CLEANING

9.7. STORAGE