Switching Fabric Module Leds; Fan Tray Status Leds; Power Supply Leds - HP FlexFabric 11908-V Installation Manual

Switching fabric module LEDs

The switching fabric module has one RUN LED and one ALM LED to indicate its operating status.
Table 42 Switching fabric module LED description
RUN LED
Flashing (0.5 Hz)
Off
Flashing (0.5 Hz)
Off
On

Fan tray status LEDs

Each fan tray has one OK LED and one FAIL LED to indicate its operating status.
Table 43 Fan tray LED description
OK
On
Off
Off

Power supply LEDs

The HP FlexFabric 1 1900 2500W AC Power Supply has one AC LED and one DC LED to indicate its
operating status.
The HP FlexFabric 1 1900 2400W DC Power Supply has one INP OK LED and one DC/FLT LED to
indicate its operating status.
Table 44 2500W AC power supply LED description
LED
AC
DC
ALM LED
Off
On
On
Off
Off
FAIL
Off
On
Off
Color Description
•
The power supply has no power input.
Off
•
The input voltage is too low, and the power supply is in self protection state.
Green The power input is normal.
Green The power supply is outputting power correctly.
Description
The switching fabric module is operating correctly.
The switching fabric module is faulty.
The temperature of the switching fabric module has exceeded the
upper or lower limit.
The switching fabric module has not started.
The switching fabric module is up.
Description
The fan tray is operating correctly.
The fan tray is faulty.
The fan tray is not powered on.
76