Emerson Unidrive M400 Series User Manual page 117

Safety Product Mechanical
information information installation
Parameter
09.069 Scope Time Period
09.070 Scope Auto-save Mode
09.071 Scope Auto-save File Number
09.072 Scope Auto-save Reset
09.073 Scope Auto-save Status
RW Read / Write RO Read only
ND No default value NC Not copied
IP IP address Mac Mac address
Unidrive M400 Control User Guide
Issue Number: 1
Electrical Getting Basic
installation started parameters the motor
Range ( )
OL
0.00 to 200000.00 ms
Disabled (0), Overwrite (1), Keep (2)
0 to 99
Off (0) or On (1)
Disabled (0), Active (1),
Stopped (2), Failed (3)
Num Number parameter Bit Bit parameter
PT Protected parameter RA Rating dependent
Date Date parameter Time Time parameter
Running NV Media Card
Optimization
Operation
RFC-A OL
Txt Text string
US User save
SMP Slot,menu,parameter
Onboard Advanced
Diagnostics
PLC parameters
Default ( )
RFC-A
RO Bit
Disabled (0) RW Txt
0 RO Num
Off (0) RW Bit
Disabled (0) RO Txt
Bin Binary parameter
PS Power-down save
Chr Character parameter
UL
information
Type
ND NC PT
US
PS
PS
FI Filtered
DE Destination
Ver Version number
117