Positioning Dental Films; Using The Panoramic X-Ray Film Holder - Microtek Medi-2200 Plus User Manual

Positioning Dental Films

A. Using the Panoramic X-Ray Film Holder
To scan a panoramic film, use the Panoramic X-Ray Film Holder, which can hold
a single piece of panoramic film.
1. Make sure that the Black Mat is removed from the digitizer lid.
2. Place the Panoramic X-Ray Film Holder on the digitizer glass surface. Make
U-shaped edge
Important: Align the holder's top
corners (left and right) of the
U-shaped edge firmly against the
top edge of the glass surface.
When placing the film holder,
make sure that the Calibration
window on the glass surface is
kept clear and free of obstruction
at all times.
3. Place the panoramic film to be
sure to orient the film holder with the "Microtek" logo facing up.
scanned inside the frame of the
film holder, with the letter (R or
L) oriented correctly and with the
correct side up. Then, lower down
the digitizer lid.
Note that the red arrow
marks on both the film
holder and digitizer's top
ruler are pointing to each
other.
Calibration window
Microtek logo
Medi-2200 Plus User's Manual 25