Prog Mode - Sartorius eLINE User Manual

NOTE:
It is possible to stop the second counter and
interrupt dispensing at any time by pressing the START
button. Releasing the START button activates the
counter again and dispensing continues.
NOTE: It is also possible to interrupt the dispensing
by pressing the START button and then ENTER key
simultaneously. The display will show E and the tip can
be emptied by pressing the START button.
NOTE:
Furthermore it is possible to continue to
aspirate and dispense the same volume without the
empty function. To continue, press the START button
immediately after E is displayed and within one second
the direction arrow will change. Keeping the START
button depressed, place the tip into the liquid again
and then release the START button to aspirate the next
sample.

9. Prog Mode

The Prog mode includes six different storage locations
(Prog 1–6). The favourite operating modes with user-
selected settings can be stored to these locations for
future recalls.
9.1. Store operating mode to storage
locations
To store an operating mode to Prog 1–6 locations
1. Complete the programming of the selected
operating mode as described in paragraphs 6 and
7
2. Press first
display the PROG 1
3. Choose the desired storage location (Prog 1–6)
with
NOTE:
The display shows simultaneously the mode
symbol of the previously stored mode in the storage
location in question.
4. Press to store the operating mode in to the
selected storage location
26
and then simultaneously to