Electrical Specifications; Programming Principle - Sartorius eLINE User Manual

NOTE:
It is possible to continue pipetting while the
eLINE® pipette is charging, connected to the AC-
adaptor. With a fully discharged battery a 30 minute
initial charging is required before continuing the
pipetting.

5.3. Electrical Specifications

Battery
- Rechargeable NiMH battery pack with protection
circuit
- 4.8 V, 500 mAH
- Charge empty batteries for a minimum of 12 hours
AC-adaptor for Charging Stand or direct charging
- Input voltages and main plug according to local
requirements
- Output voltage 7,5V DC, 800 mA
AC-adaptor for Charging Carousel
- Input voltages and main plug according to local
requirements
- Output voltage 9 V DC, 2000 mA

6. Programming Principle

The eLINE® pipettes features 10-11 different
operating modes and six different storage locations
for frequently used modes with user-selected settings.
The operating modes are divided in to three Mode
Ranges (PIPET, MULTI, PROG) and each Mode Range
includes the following operating modes:
Mode Range: Operating Modes:
PIPET SP, P, rP, P+MIXING, P COUNT,
P MANUAL*
MULTI d, dd, dd+MIXING, Sd, SA, Ad
PROG 1, 2, 3, 4, 5, 6 (=storage locations)
Programming is performed by using the Select, Enter
and arrow keys. The mode range is selected with the
Select key, the desired operating mode is then selected
with the arrow key and selection confirmed with Enter
key.
11