Sartorius eLINE User Manual page 27

1. Press to display MULTI
2. Scroll with
3. Confirm by pressing
4. Select the desired dispensing volume by using the
NOTE:
When holding down
starts to scroll faster.
5. Press or
display the aliquots
6. Select the desired number of aliquots with
7. Press or
8. Select the desired dispensing pace with
9.9 seconds)
9. Press to confirm the selection and to display
the speed in or press
14.
10. Select the speed in with
11. Press or
display the speed out
12. Select the speed out with
13. Press or
14. Position the tip to aspirate and press the START
button . The display shows PRE OUT and arrow
down to indicate the reset function.
15. Position the tip to discard priming excess and press
the start button
16. To dispense, position the tip, press the START
button once and the pipettor dispenses the
aliquots at the specified pace.
17. Finally position the tip to discard any remaining
excess and press the START button twice
until the symbol Ad is displayed.
the volume display
to confirm the selection and to
to confirm selection
and continue from Step
(1= Min to 9 = Max)
to confirm selection and to
(1= Min to 9 = Max)
to confirm selections
.
(0.1 -
.
25