Preparing The Intellistart Fluidics System; Installing The Solvent Manifold Drip Tray - Waters TQ Detector Quick Start Manual

Preparing the IntelliStart fluidics system

See also: Appendix B of the Waters TQ Detector Operator's Guide.

Installing the solvent manifold drip tray

Required materials
Chemical-resistant, powder-free gloves
To install the solvent manifold drip tray:
Warning:
with biohazardous and/or toxic materials. Always wear
chemical-resistant, powder-free gloves while performing this
procedure.
Install the solvent manifold drip tray as shown below:
The solvent manifold drip tray can be contaminated
TP02685
Preparing the IntelliStart fluidics system 2-9