Blocking The Hob's Sensor; Disconnection For Safety Purposes - Teka VTN DC User Manual

Hide thumbs Also See for VTN DC:
Table of Contents

Advertisement

GB
at any time, providing the hotplate is swit-
ched on.
DISCONNECTING / TURNING OFF THE
DOUBLE HOTPLATE
1 The hotplate that you want to disconnect
has to be already activated. The decimal
point (13) has to be lit.
2 Touch the double hotplate's sensor
(6). The pilot (10) will go off, and the out-
side ring will be disconnected.
DISCONNECTING / TURNING OFF THE
TRIPLE HOTPLATE (MODEL TR 735 AB)
1 Touch the double hotplate's sensor
(6). The first pilot (10) will go off, and the
third ring will be disconnected.
2 If you touch the double hotplate's sensor
(6) again, the second pilot (10) will
go off and the second ring will be dis-
connected also. Only the inner circuit
will be on.
Blocking the Hob's Sensors
To avoid the controls being tampered with,
you can block the entire unit, except for the
on/off sensor, using the blocking sensor
(9) (except on models TT 600, TB 600,
TT 630, TR 600, TC 620 and TR 735 AB -
see next section). This feature is useful as
a child-safety device. When blocking is
activated, the pilot (12) is lit.
If you use the on / off sensor to turn the
appliance off when blocking is activated,
the appliance will still be blocked when you
turn the appliance back on again.
26
SAFETY FUNCTION (only models TT
600, TB 600, TR 600, TT 630,TC 620
and TR 735 AB)
The safety function can be activated after
the hob is connected. To do so, touch sen-
sor
(1) to activate the touch control.
Immediately touch sensor
seconds. An L (for 'Locked') will appear in
the displays. After a few seconds the touch
control will be switched off. If the cooking
L
area is hot, an
and an
nately on the corresponding display.
This needs to be done within 5 seconds
after the touch control is activated, with no
sensor other than those indicated being
touched during that time, or the blocking
will not be carried out.
The electronic control will remain blocked
until the user unblocks it, even after the
control is disconnected using the on/off
sensor or when restarting after there has
been a power cut.
Unblocking in order to cook (only on
models shown in figure 8)
To unblock the control and use it, touch
sensor
(1) to activate the touch control.
Immediately, and simultaneously, touch
the two
(5) sensors on the right or, on
model TR 735 AB, the two sensors situa-
ted on the left. The L vanishes from the dis-
play and an 0 appears with the lower point
H
flashing, or a
and an
tely if the corresponding hotplate is hot,
and the hob will be ready to use for coo-
king. When you disconnect the control with
the on/off sensor
tion will be reactivated and will reappear
the next time the touch control is activated.
Cancelling the blocking function
Blocking can be permanently deactivated
(4) for five
H
will appear alter-
0
appear alterna-
(1) the blocking func-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents