Appliance Description; Product View And Parts; Operating The Hob With The Sensor Buttons - Teka VT-TC-2P Instructions For Fitting And Use

Appliance description

Appliance description
The decorative design may deviate from the illustrations.
18
1. ON/OFF button
2. Plus button
3. Minus button
4. Power setting display
5. Lock button
6. Lock control lamp
7. Circuit activation key
8. Multi-circuit control lamp
Operating the hob with the sensor
buttons
The ceramic glass hob is operated with touch control sensor
buttons. The sensor buttons are operated as follows: lightly touch
a symbol on the surface of the ceramic glass plate. A buzzer will
indicate when the controls have been operated correctly. The
touch control sensor button will then be indicated as "button".
ON/OFF button (1)
This button is used to switch the entire hob on and off. It is, as it
were, the main switch.
Minus button (3)/ Plus button
These buttons are used to set the cooking levels.
The minus button reduces the setting and the plus button raises
it.
The setting can be deleted by pressing both buttons
simultaneously.
Power setting display (4)
The power setting display shows the power setting which has
been selected, or:
H....................................Residual heat
..................................Keeping warm function
Decimal point ................Automatic boost function
Lock button (5)
The lock button can be used to lock all of the buttons.
Circuit activation key (7)
To activate other heating circuits.
GB
(2)