Picture Id Feature; Blf List Uri Settings - Aastra BLUESTAR 8000I Pbx-Mode Administrator Manual

Operational, Basic Parameters

Picture ID Feature

Parameter –
image server uri
Description
Format
Default Value
Range
Examples

BLF List URI Settings

Parameter–
list uri
Description
Format
Default Value
Range
Example
A-41
Configuration Files –
aastra.cfg, <model>.cfg, <mac>.cfg
Allows you to specify the server URI where pictures are stored for display to
the BluStar 8000i during incoming and outgoing calls, and in the directory,
callers list, and redial list entries. The pictures are dynamically retrieved from
the centralized server for each call and then locally cached in the BluStar
8000i to reduce network traffic.
If there is no picture on the central server for the dialed and/or caller ID
number, and directory, callers list, and/or the dial list entry, the generic blue
figure image is shown.
Pictures can be in either "png", "gif", or "jpeg" formats, but must be named
".png", up to 320 pixels wide x 320 pixels tall, and in 24 bit color.
Notes:
• Entering no value for this parameter disables this feature.
• The "image server uri" parameter supports FTP, HTTP, and HTTPS.
Server URI String (image server uri: protocol://[username]:[pass-
word]@server)
NA
NA
image server uri: http://mypictureserver.acme.com
image server uri: ftp://mypictureserver.acme.com (anonymous ftp connec-
tion)
image server uri: ftp://user:password@mypictureserver.acme.com (ftp con-
nection using "user" and "password" for the credentials)
Configuration Files –
aastra.cfg, <model>.cfg, <mac>.cfg
Specifies the URI that the BluStar 8000i uses to access the BLF list on the Broadsoft
server when the BLF list key is pressed. When you specify a URI for this parameter,
the BluStar 8000i uses the internet to access the BLF list on the Broadsoft server.
HTTP server path or Fully Qualified Domain Name
NA
NA
list uri: my6757i-blf-list@as.broadworks.com
41-001390-00 Rev 02 – 12.2011