Aastra BLUESTAR 8000I Pbx-Mode Administrator Manual page 106

Parameter –
auto resync time
Description
Format
Default Value
Range
Example
Parameter –
auto resync max delay
Description
Format
Default Value
Range
Example
41-001390-00 Rev 02 – 12.2011
Configuration Files –
aastra.cfg, <model>.cfg, <mac>.cfg
Sets the time of day in a 24-hour period for the BluStar 8000i to be automati-
cally updated. This parameter works with TFTP, FTP, HTTP and HTTPS servers.
Notes:
• The resync time is based on the local time of the BluStar 8000i.
• The value of 00:00 is 12:00 A.M.
• When entering a value for this parameter using the configuration files, the
value can be entered using minute values from 00 to 59 (for example, the
auto resync time can be entered as 02:56).
• Auto-Resync adds up to 15 minutes random time to the configured time. For
example, if the auto resync time parameter is set to 02:00, the event takes
place any time between 02:00 and 02:15.
• When the language on the BluStar 8000i is set to French or Spanish, you must
enter the time in the format "00h00" (configuration files only).
String
hh:mm
00h00 (for French and Spanish configuration files)
00:00
00:00 to 23:59
auto resync time: 22:30
Configuration Files –
aastra.cfg, <model>.cfg, <mac>.cfg
Specifies the maximum time, in minutes, the BluStar 8000i waits past the
scheduled time before starting a checksync.
Integer
0
0-1439
auto resync max delay: 20
Operational, Basic Parameters
A-16