TABLE OF CONTENTS Introduction -------------------------------------------------------------------4 Features and Controls -----------------------------------------------------5 Installation ---------------------------------------------------------------------7 Installing your Headset Telephone -----------------------------------7 Operation ----------------------------------------------------------------------8 Using the Headset --------------------------------------------------------8 Making Outgoing Calls ---------------------------------------------------9 Answering Incoming Calls ----------------------------------------------9 Adjusting the Ringer Volume ----------------------------------------- 10 Using the Tone/Pulse Switch ----------------------------------------- 10 Using the Redial Button ----------------------------------------------- 10 Using the Flash Button ------------------------------------------------- 11 Using the Hold Button -------------------------------------------------- 11...
INTRODUCTION Thank you for purchasing the Model BE-100HT Headset Telephone. The BE-100HT is a full featured compact telephone, designed to provide hands-free operation using a comfortable lightweight headset. You will experience a greater level of comfort and convenience with the BE-100HT Headset Telephone than...
Insert the plug from headset cord into this jack. Adjustable boom positions microphone for comfort and voice clarity. Adjustable head band for comfort. Adjustable for right or left handed use. Plugs into jack (11) on BE-100HT Telephone. - 5 -...
Page 6
BE-100HT. 2. Confirm the belt clip mounting tabs are aligned correctly. 3. Press the belt clip towards the right side of the BE-100HT to lock the belt clip in place. B ELT C LI P...
INSTALLATION INSTALLING YOUR HEADSET TELEPHONE The BE-100HT is a complete telephone and can be used in the same manner as any single line telephone. See Figure 3 1. Insert the plug from the headset cord into the modular jack marked HEADSET on the left side of the BE-100HT.
OPERATION USING THE HEADSET The BE-100HT is supplied with a high quality microphone to provide clear voice communications. The boom microphone can be swiveled to position so the headset can be used on either ear. See Figure 4 1. Place the headband over...
4. Adjust the VOLUME control to set the dial tone volume to a comfortable sound level. 5. Using the dial pad of your BE-100HT, dial the number you want to call. You will hear the numbers dialing in your headset speaker.
ADJUSTING THE RINGER VOLUME The volume of the telephone ringer can be adjusted by moving the ringer switch (2) on the back of the BE-100HT either to the right LOW or left HI. TONE/PULSE SWITCH The BE-100HT can dial outgoing calls using either TONE (DTMF) or PULSE dialing.
1. The flash button can be used if you have call waiting service to switch between calls (consult your local telephone company for this service). 2. The flash button feature can also be used when the BE-100HT is connected to compatible PBX system (consult your PBX system manual).
CARE AND MAINTENANCE Your BE-100HT telephone has been designed to provide years of trouble free service. It is a sensitive electro-mechanical instrument. To assure its longevity, please read the following maintenance instructions. • Keep the BE-100HT telephone away from heat as high temperatures can shorten the life of the electrical components and distort or melt its plastic parts.
FCC INFORMATION This equipment complies with Part 68 of the FCC Rules. On the bottom or back of this equipment is a label that contains, among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. Upon request, you must provide this information to your telephone company.
IMPORTANT SAFETY INFORMATION When using your telephone, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and/or injury to persons including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3.