Checking MEM LED befo re po wer o ff
Don't turn off the power during blinking MEM LED. It may cause malfunction of
system. If you want to turn off power, turn off power switch after dismounting
MEM with 'Key MMC 817 MEM UMOUNT'.
Checking LAN cable during lig hting LAN LED o n
LAN LED lights on in case of being installed EPM board although LAN cable is
not connected. Check if LAN cable is connected during lighting LAN LED on.
The descriptions about each part on the right of the cabinet are listed in the table below.
Part
C.O 1-4
LINK1-3
EXT1-8
Reset
SLT1, 2
MISC
LAN
© SAMSUNG Electronics Co., Ltd.
Fig ure 2.3 Rig ht side view o f OfficeServ 7030 cabinet
Table 2.3 Parts o n the rig ht panel o f the cabinet
Trunk ports
Ports that connect the Base cabinet with the expansion cabinet
Station ports for subscribers (ex. analog phone, digital phone, LAN)
Button for resetting the system
Station ports for analog phones
Ports that connect external music sources, paging device, loud bell,
common bell, or door bell
LAN port
OfficeServ 7030 System Descriptio n
Functio n
2-5