2.2 Cabinet Co nfig uratio n
OfficeServ 7030 consists of two cabinets (basic/expansion cabinet). The basic cabinet
manages the entire OfficeServ 7030, performs switching, processes signals, and manages
the subscriber terminals. The expansion cabinet is the minor control part and controls the
line boards and sends/receives information to/from the basic cabinet.
The descriptions about each part on the left of the cabinet are listed in the table below.
Power Switch
Power I/O Connector
Turning o ff po wer switch after dismo unting MEM
You should dismount MEM before turning off power switch. Use 'Key MMC 817
MEM UMOUNT' when dismounting MEM.
© SAMSUNG Electronics Co., Ltd.
Fig ure 2.1 Left side view o f OfficeServ 7030 cabinet
Table 2.1 Parts o n the left side o f the cabinet
Part
Power on/off OfficeServ 7030 system
Connector for the power cable connection
OfficeServ 7030 System Descriptio n
Functio n
2-3