The descriptions of each part located on the right of the cabinet are listed in the table
below.
Part
C.O 1-4
LINK1-3
EXT1-8
Reset
SLT1, 2
MISC
LAN
© SAMSUNG Electronics Co., Ltd.
Checking MEM LED before power off
Don't turn off the power during blinking MEM LED. It may cause malfunction of
system. If you want to turn off power, turn off power switch after dismounting
MEM with 'Key MMC 817 MEM UMOUNT'.
Checking LAN cable during lighting LAN LED on
LAN LED lights on in case of being installed EPM board although LAN cable is
not connected. Check if LAN cable is connected during lighting LAN LED on.
Figure 1.3 Right Side View of the OfficeServ 7030 Cabinet
Table 1.5 Parts on the right panel of the cabinet
Trunk ports
Ports that connect the base cabinet with the expansion cabinet
Station ports for subscribers (i.e analog phone, digital phone, LAN)
Button for resetting the system
Station ports for analog phones
Ports that connect external audio devices, paging device, loud bell,
common bell, or door bell
LAN port
OfficeServ 7030 Installation Manual
Function
9