Pro G Ramming - Samsung OfficeServ 7030 System Description

Hide thumbs Also See for OfficeServ 7030:

Table of Contents

CHAPTER 1. Overview o f OfficeServ 7030

1.3 Pro g ramming

The Man Machine Communication (MMC) program can change the data value used for the

system operation program. The MMC program is categorized into three levels, which are

technician, operator, and subscriber. Depending on these levels, some MMCs can be

programmed by the subscribers while some MMCs cannot.

A password is required for technician level programming or operator level programming;

however, a password is not required for subscriber level programming.

Technician-Level Pro g ramming

All programs are programmable.

Programming can be made in any stations in OfficeServ system, but the programming can

be made only in a station at the same time.

Operato r Level Pro g ram

The operator can program only the program specified in 'Specification of Program 802

Operator Program Range' by a technician. Programming can be made in any stations in the

tenant group, but the programming can be only made in a station at the same time.

Subscriber Level Pro g ram

Only subscriber programs are programmable.

1-6

Table of Contents