Time Schedule Operation; To View And Change Set Points - Carrier AquaEdge 19XRV series Operation, Maintenance And Installation Manual

Force Indication — A forced value is indicated by
"SUPVSR," "SERVC," or "BEST" flashing next to the point
value on the STATUS table.
TIME SCHEDULE OPERATION (Fig. 23)
1. On the Menu screen, press
2. Press or
NEXT PREVIOUS
schedule.
OCCPC01S — LOCAL Time Schedule
OCCPC02S — ICE BUILD Time Schedule
OCCPC03S — CCN Time Schedule
3. Press to view the desired time schedule.
SELECT
4. Press or
NEXT PREVIOUS
period or override to change.
5. Press to access the highlighted PERIOD or
SELECT
OVERRIDE.
6. a. Press
INCREASE
time values. OVERRIDE values are in one-hour
increments, up to 4 hours.
b. Press ENABLE to select days in the day-of-week
fields. Press
DISABLE
period.
.
SCHEDULE
to highlight the desired
to highlight the desired
or to change the
DECREASE
to eliminate days from the
Fig. 23 — Example of Time Schedule
Operation Screen
7. Press to register the values and to move hori-
ENTER
zontally (left to right) within a period.
8. Press to leave the PERIOD or OVERRIDE.
EXIT
9. Either return to Step 4 to select another PERIOD or
OVERRIDE, or press
time schedule screen and save the changes.
10. The Holiday Designation (HOLIDEF table) may be
found in the Service Operation section, page 60. The
month, day, and duration for the holiday must be
assigned. The Broadcast function in the BRODEF
table also must be enabled for holiday periods to
function.
TO VIEW AND CHANGE SET POINTS (Fig. 24)
1. To view the SETPOINT table, from the MENU screen
press
SETPOINT
28
a19-1638
again to leave the current
EXIT
.