Bus Connector; Module Accessories - Siemens SIMATIC S7-300 Hardware And Installation Manual

Installation
Accessories included
Installation accessories are included with the module package. The appendix
contains a list of accessories and spare parts together with the corresponding order
numbers.
Table 6-1
Module
CPU
Signal module (SM)
Function Module (FM)
Communication module (CP)
Interface module (IM)
Tools and material required
For your S7-300 installation you require the tools and materials listed in the table
below.
6-2

Module accessories

Accessories included
1 x Slot number label
2 keys
(only for CPUs with a key
switch, such as the CPU
318-2 DP)
Inscription labels

1 bus connector

1 labeling strip
1 bus connector
1 inscription label
(only CP 342-2)
1 x Slot number label (only
IM 361 and IM 365)
S7-300 Programmable Controller Hardware and Installation
Description
For assigning slot numbers
The key is used for
operating the CPU's mode
selector switch
for the MPI address and
Firmware Version (all CPUs)
for the inscription of
integrated I/Os (only CPU
312 IFM, 314 IFM and 31xC)
Tip: Templates for labeling
strips are available on the
Internet at
http://www.ad.siemens.de/cs
info under article ID
11978022.
For electrical interconnection
of modules
for labeling module I/Os
Tip: Templates for labeling
strips are available on the
Internet at
http://www.ad.siemens.de/cs
info under article ID 406745.
For electrical interconnection
of modules
for labeling the connection to
the PLC interface
Tip: Templates for labeling
strips are available on the
Internet at
http://www.ad.siemens.de/cs
info under article ID 406745.
For assigning slot numbers
on racks 1 to 3
A5E00105492-02