Connecting; Connecting The Bus Connector - Siemens SIRIUS 3RW5 series Manual
Soft starters and solid-state
switching devices modbus tcp communication module
Hide thumbs
Also See for SIRIUS 3RW5 series:
- Equipment manual (214 pages) ,
- Manual (116 pages) ,
- Equipment manual (150 pages)
Table of Contents
Advertisement
Connecting
5.1
Connecting the bus connector
Requirements
● Mounted 3RW5 communication module
● Bus connector (Page 27)
● Cable tie
Note
Malfunctions caused by EMC interference
The purpose of shielding cables is to attenuate (dampen) magnetic, electrical or
electromagnetic interference fields. Connect the cable shield of the fieldbus cable to system
ground with low impedance to that interference currents on the cable shield can be
conducted to ground.
Generally follow the instructions in the EMC Guide (http://www.siemens.com/emc-guideline)
and implement the measures stated in it for shielding the cables and for connecting the
shield.
SIRIUS 3RW5 Modbus TCP communication module
Manual, 03/2018, A5E43676481002A/RS-AA/001
5
35
Advertisement
Table of Contents
