Commissioning The Modules; Connecting The Pg; Connecting A Pg To An S7-300 - Siemens SIMATIC S7-300 Hardware And Installation Manual

Commissioning
9.6

Commissioning the modules

9.6.1 Connecting the PG

Requirement
The programming device must be equipped with an integrated MPI interface or an
MPI card in order to connect it to an MPI.
Cable length
For information on possible cable lengths refer to the Chapter Configuring; Cable
Lengths.

Connecting a PG to an S7-300

1. Connect the PG with a patch cable to the MPI of the CPU.
Alternatively, you can produce the connecting leads with PROFIBUS cable and bus
connectors yourself (refer to Chapter Wiring, Connecting Bus Connectors).
PG
Figure 9-4 Connecting a PG to an S7-300
9-10
SF SIEMENS
BUSF
DC5V
FRCE
RUN
STOP
S7-300
PG cable
S7-300 Programmable Controller Hardware and Installation
A5E00105492-02