Example Of Emc Compatible Wall-Mounting - Siemens SIMATIC S7-300 Hardware And Installation Manual

Note the following points on framewall-mounting:
• When mounting on varnished or anodized metal parts, use special contact
washers or remove the insulating layers.
• Provide a large-surface and low-impedance metal-to-metal connection for
fastening the shielding/protective conductor busbar.
• Always touch-protect live mains conductors.
The figure below shows an example of EMC compatible wall-mounting of an S7.
Figure 12-3 Example of EMC compatible wall-mounting
S7-300 Programmable Controller Hardware and Installation
A5E00105492-02
Appendix
12-11