Removing The Batteries - Degonda-Rehab SA TwistT4 Operating Instructions Manual

Removing the Batteries

Requirements:
 Allen key, size 6
 Spanner, 10mm
ADVICE
 Before tilting the lift must be completely down. Then first gently lift the seat. In doing so,
attention must always be paid to the wiring loom that it is not tensioned or squashed.
 Remove the main fuse before changing the batteries. (See Chapter, Page 29, Main
Fuse)
 Remove knurled screws (1).
 Remove the cover plate (2).

With the Allen key (3) remove the screws on
both sides.
 Carefully tilt the seat unit backwards (4)
2
1
- 38 -
3
4