Central Electrical Leg Support; Setting The Length Of The Leg Support; Setting The Calf Supports Sideways - Degonda-Rehab SA TwistT4 Operating Instructions Manual

Central Electrical Leg Support

Setting the Length of the Leg Support

Requirements:
 Allen key, size 5

Loosen the screws (1) with the Allen
key and remove them.
 Manually set the desired height.
 Refit the screws (1) and tighten them with the Allen
key.
INFORMATION
The screws must be removed so that the height can be set. Refit them afterwards.

Setting the Calf Supports Sideways

Requirements:
 Spanner, 10mm
 Loosen (1) with the spanner.
 Manually set the desired width.
 Tighten (1) with the spanner .
- 31 -
1
1