Setting The Width Of The Side Sections (Standard Seat) - Degonda-Rehab SA TwistT4 Operating Instructions Manual

Setting the Width of the Side Sections (Standard Seat)

The screws for the width setting of the armrests can be found left and right underneath the
seat.
Requirements:
 Allen key, size 5
 Spanner, 13mm
 Loosen the screw (1) with the Allen key
hold against rotation with the spanner
on the opposite side. Remove the
screw and nut.
 The complete arm rest can now be set
to the desired width (2).
 Retighten the screw and nut with the Allen
key (1).
ATTENTION! The screw must be tightened through the holes in the seat as well as in the
side section.
- 26 -
2