Pushing Mode; Disengaging The Motors - Degonda-Rehab SA TwistT4 Operating Instructions Manual

Pushing Mode

In order to be able to push the electric wheelchair the motors must first be disengaged.

Disengaging the Motors

ATTENTION! Risk of the electric wheelchair rolling away
 In the disengaged condition (pushing mode) the motor brakes are out of operation!
In every case when parking the vehicle, the clutch lever must be engaged again
(motor brakes in operation)!
The clutch levers of the motors can be found on the left and right drive motors.
Disengaging the motors
 Switch off the control panel
 Turn the clutch lever (1) to the right.
 Turn the clutch lever (2) to the left.
Engaging the motors
 Switch off the control panel
 Turn the clutch lever (1) to the left
 Turn the clutch lever (2) to the right
Motors disengage Motors engaged
- 15 -
1 2