Adapting the Wheelchair to the Posture of the User
In this chapter the different possibilities for adapting the wheelchair to the posture of
the user are explained.
Possibilities for the Adaptation of the Control Panel and the Armrests
Adapting the Control Panel to the Arm Length (Standard and Bioseat)
The wing screw can be found on the control panel mounting for the parallelogram under
the armrest. Its function is identical on both standard and Bioseats.
Loosen the wing screw (1).
Set the control panel to the correct arm
length by sliding it backwards or forwards
(2).
Retighten the wing screw (1).
Adapting the Control Panel to the Height of the Armrest (Standard Seat)
Requirements:
Allen key, size 4
Loosen (1) with the Allen key
Push the control panel mounting up or
down until the desired height is reached.
Tighten (1) with the Allen key .
1
- 24 -
1
2