Getting On And Off; Removing And Fitting The Side Section - Standard Seat; Removing And Fitting The Side Section Bio Seat - Degonda-Rehab SA TwistT4 Operating Instructions Manual

Getting On and Off

Risk of injury if the leg support breaks through it being used as a step!
 Never use the leg support as a step for getting on and off.

Removing and Fitting the Side Section - Standard Seat

In order to be able to get on and off from the side, the side section must be removed.
Removal:
 Release the clamping lever (1).
 Pull the side section out of its mounting .
Fitting:
 Push the side section into its mounting
 Tighten the clamping lever (1).

Removing and Fitting the Side Section Bio seat

In order to be able to get on and off from the side, the side section must be removed.
Removal:
 Loosen the rotary handle (1).
 Lift up the side section (2)
 Pull the side section (3) out of its mounting forwards at
an angle.
Fitting:
 Push the side section (1) into
its mounting to the back at an
angle
 Push the side section (2) down into
its mounting.
 Tighten the rotary handle (3).
- 11 -
1
2
1
1
3
2
3