Setting The Height Of The Armrests (Standard Seat); Setting The Height Of The Armrests (Bioseat) - Degonda-Rehab SA TwistT4 Operating Instructions Manual

Setting the Height of the Armrests (Standard Seat)

Requirements:
 Allen key, size 4
 Loosen (1) with the Allen key.

The armrest must not be pulled
out beyond the red mark (max.)
(2).
 Set the desired height.
 Tighten (1) with the Allen key .
Setting the Height of the Armrests
Requirements:
 Allen key, size 5
 Spanner, 13mm
 Loosen (1) with the Allen key.
 Set the armrest to the desired height (2).
 Retighten the Allen key (1) .
 Loosen the locking nut on the turnbuckle
and by turning set the incline of the
armrest.
 Retighten the locking nut (3).
1
(Bioseat)
1
3
- 25 -
2
2