Mira Mode Instructions Manual page 28

14. Thoroughly flush the hot and cold
water supply pipes. The supplies must
be clean and free from debris before
connecting the shower control. Failure
to do so may result in product
malfunction.
15. Slide the compression nuts and olives
over the supply pipes.
16. Insert the hot and cold supply pipes fully
into the shower control and slide the olives
and compression nuts into place.
17. Use a suitable spanner to tighten the
compression nuts.
18. Continue the procedure as for solid and
dry-lined walls.
Mira Mode B
Shower Fittings
1. Fit the backplate to the wall over the
protruding pipe (outlet pipe from shower
control) with the fixing screws and wall
plugs provided.
2. Slide the olive and compression nut over
the supply pipes.
Outlet Pipe
4 mm Minimum Depth
21 mm
Maximum Depth
Ensure the backplate is fitted
as illustrated. Failure to do so
may result in the outlet pipe
becoming damaged when
drilling or fixing with screws.
Wall Plug
Olive
Compression Nut
28
70 mm Clearance
Backplate
Fixing Screw