Mira Mode Instructions Manual page 17

Mira Mode
Back Inlet Supplies (rising or falling concealed pipework)
1. Decide on a suitable position for the
product ensuring that the mixer and
the shower head is at a height suitable
for all users to operate (Note! longer
riser arms are NOT available).
2. Remove backplate from rear of mixer
by loosening grub screw with hexagon
key (supplied) on the underside of
mixer.
3. Use the backplate to mark 4 hole
positions. Drill the wall and insert the
wall plugs (4 off, supplied). For other
types of wall structure alternative
fixings may be required.
Fit the backplate to the wall using the
fixing screws. Ensure TOP on
backplate is positioned correctly.
4. Use a spirit level and pencil to mark
the route of the hot and cold water
supply pipes at 110 mm centres.
Backplate
17
Wall Plugs
Fixing Screws