Mira Mode Instructions Manual page 23

13. Fix the wall bracket to the support
bracket using the four screws
(supplied) and the shower control to
the wall bracket, securing in position
with the grub screw.
14. Align the holes in the support bracket
with the holes in the wall and secure
the shower control with the fixing
screws (supplied).
15. Slide the compression nuts and
olives over the supply pipes.
16. Insert the hot and cold supply pipes
fully into the shower control and slide
the olives and compression nuts into
place.
17. Use a suitable spanner to tighten the
compression nuts.
Shower Control
Support
Bracket
23
Wall Bracket
Fixing Screws
2.5 mm A/F
Hexagon Wrench