Infrared Remote Control (Included) - involight VENTUS L User Manual

3.7 Infrared remote control (included):

The supplied remote control also allows the "VENTUS L" to be controlled without a DMX controller and offers
much more possibilities than the functions available via the on-board menu.
Make sure the remote control is pointing directly at the unit and there are no obstructions between the unit and the
remote control.
AUTO mode:
The "AUTO" key puts the unit into automatic mode.
1. Press <AUTO> on the remote control.
2. Press <+> or <-> to switch between the 7 different
Automatic programs.
SOUND Mode:
The <SOUND> key puts the unit into the music-controlled mode.
1. Press <SOUND> on the remote control.
2. Press <+> or <-> to switch between the 7 different
Sound programs.
STROBE Mode:
Press the <STROBE> key to activate the stroboscope in the automatic mode
Or music-controlled operation.
1. Press <STROBE> on the remote control.
2. Press <+> or <-> to switch between the 9 different strobe effects
to choose.
3. Press <STROBE> again to turn off the strobe effect.
SPEED Mode:
Use the <SPEED> button to adjust the speed in the automatic mode
Or music-controlled operation.
1. Press <SPEED> on the remote control.
2. Press <+> or <-> to select between 9 speed levels.
DMX Mode:
Press the <DMX /%> key to move the unit to DMX mode.
MANUAL Mode:
1. Press <MANUAL> on the remote control.
2. Use the R, G, B, W buttons to select the desired colors for the
Flower effect.
3. Press <+> or <-> to switch between the 15 different color presets
to choose.
SENSITIVITY:
With the SENSIVITY you adjust the microphone sensitivity in the music - controlled
Operation.
1. Press <SENSIVITY> button to select the microphone sensitivity.
2. Press <+> or <-> to switch between the 9 levels
Microphone sensitivity.
UNIT Mode:
1. Press the <UNIT> button on the remote control.
2. Press <1> to enable or disable the laser.
BLACK OUT:
The <BLACK OUT> button turns off all light sources.
1. Press <BLACK OUT> to turn off the light sources,
2. Press <BLACK OUT> again to turn on the light sources.
Part 4. Troubleshooting:
The device does not work, no light:
Check the mains connection and the main fuse.
No response to the DMX controller:
Check the DMX connectors and cables for correct connection. Check the address settings and the DMX polarity.
Check whether the DMX cables are near or next to high voltage cables. Try another DMX controller.
If the instructions given here do not lead to success, please contact your specialist dealer.
23