Assignment Of The Dmx Channels In The Overview - involight VENTUS L User Manual

select DMX start address
now set the desired start address.
MASTER/SLAVE-OPERATION:
Der „VENTUS M" kann mit weiteren Geräten verlinkt werden. Um ein Gerät als
drücken Sie die Taste
„ Enter" .
Wählen Sie am Master-Gerät das gewünschte Programm. Die zusammengeschalteten Geräte
arbeiten nun synchron.
DISPLAY INVERTING:
"Menu"
Press the
buttons to select whether the display should be set for normal use
"Enter"
Confirm with the
head is mounted overhead.

3.3 Assignment of the DMX channels in the overview:

NOTE: Basic knowledge of the DMX512 control standard is required so that the device can be correctly
operated and programmed with a DMX controller.
4 Channel mode:
CH1
Laser-Effekt Motor
CH2
Derby-Effekt Motor
CH3
"d1" "d512".
to
„ Menu"
bis im Display
"disp"
button until
key. The display can thus be adjusted so that it also displays correctly when the
0-9 No Rotation
Laser-Motor forward rotation (slow → fast )
10-59
60-69
Stop
70-119 Laser-Motor backward rotation
120-129 Stop
130-255
Laser-Motor forward- and backward-rotation
0-127 Stepless positioning.
128-255
Motor forward- and backward-rotation
0-9 Black out
10-19 Red
20-29 Green
30-39 Blue
40-49 White
50-59 Red+Green
60-69 Green+Blue
70-79 Blue+White
80-89 Red+White
90-99 Red+Blue
100-109 Green+White
110-119 Blue+Green+White
120-129 Red+Blue+White
130-139 Red+Green+White
140-149 Red+Green+Blue
150-159 All LEDs on.
160-169 Rainbow-Effect Group 1
170-179 Rainbow-Effect Group 2
180-189 Rainbow-Effect Group 3
190-199 Rainbow-Effect Group 4
200-209 Rainbow-Effect Group 5
210-219 Rainbow-Effect with Strobe Group 1
220-229 Rainbow-Effect with Strobe Group 2
230-239 Rainbow-Effect with Strobe Group 3
240-249 Rainbow-Effect with Strobe Group 4
"Up"
With the
„ Slav"
erscheint. Bestätigen Sie mit der Taste
is displayed. You can now use the
"dISP"
21
"Down"
and buttons, you can
„ Slave"
"Up"
and
or for use via head
(slow → fast )
(slow → fast )
(slow → fast )
einzustellen,
"Down"
"d. S IP".